SWA Cable Buying Guide

Telenco UK | Power Cables

SWA Cable Buying Guide

SWA cable (steel wire armoured cable) is the go-to power cable for underground, outdoor and exposed runs. This guide explains how SWA cable is built, when to use it, how to choose between 2 core and 3 core SWA, and which SWA glands you need to terminate it.

Buy SWA power cable by the metre from Telenco UK, so you only pay for the length your job needs.

SWA power cable 3 core 6mm
0.6/1kVVoltage rating
BS 5467Manufactured to standard
BASECApproved cable
Per metreCut to the length you need
SWA Cable Explained

What is SWA cable?

SWA stands for steel wire armoured. An SWA cable has a layer of galvanised steel wires wrapped around the insulated cores, which protects the cable from crushing, impact and digging damage. That armour is what makes SWA suitable for direct burial, outdoor routes and installations where an ordinary sheathed cable would be at risk.

The SWA power cable we supply is built in layers: Class 2 stranded copper conductors, XLPE (cross-linked polyethylene) insulation, PVC bedding, the steel wire armour, and a tough, UV resistant PVC outer sheath.

It is rated at 0.6/1kV, manufactured to BS 5467, flame retardant to IEC/EN 60332-1-2 and BASEC approved.

SWA power cable 2 core 6mm
Where to use it

When should you use SWA cable?

Choose SWA cable wherever a power cable needs mechanical protection as well as insulation.

Underground & direct burial

The steel armour protects buried cable runs from crushing and accidental digging damage.

Outdoor installations

A UV resistant PVC sheath makes SWA suitable for exposed external routes.

Cable ducting

SWA can be pulled through cable ducting for extra protection and easier future access.

Power to cabinets & outbuildings

Feeding power to street cabinets, plant, outbuildings and remote equipment.

Industrial & commercial sites

Fixed wiring in industrial buildings, commercial premises and manufacturing facilities.

Utilities infrastructure

Power distribution and plant and machinery connections across utility networks.

2 Core or 3 Core SWA Cable?

The number of cores is the number of insulated conductors inside the armour. Your circuit design decides which you need.

2 Core SWATwo conductors (line and neutral). Used where the circuit design allows the steel armour to act as the protective conductor.
3 Core SWAThree conductors, giving a separate core that can be used as the earth (protective) conductor alongside line and neutral.
6mm² conductorsBoth our 2 core 6mm SWA and 3 core 6mm SWA use 6mm² stranded copper conductors.
Sizing

What size SWA cable do I need?

SWA cable is sized by the cross-sectional area of each conductor, for example 6mm². The right size depends on the load current, the length of the run (longer runs need larger conductors to limit voltage drop), how and where the cable is installed, and the protective device on the circuit.

Cable sizing should always be calculated by a qualified electrician to BS 7671 (IET Wiring Regulations). If you need a size or core count you can't see on our website, contact our team.

Bending radius: our SWA cables have a minimum bending radius of 6 × the overall cable diameter, so plan bends and pulling routes accordingly.

SWA cable gland BW25L
Terminating SWA

Choosing SWA Cable Glands

SWA cable must be terminated with an SWA gland, which clamps the steel armour for mechanical retention and armour continuity where it enters an enclosure, distribution board or panel.

BW20L – 20mm

Brass SWA cable gland 20mm BW20L for SWA terminations into 20mm entries.

BW25L – 25mm

Brass SWA cable gland 25mm BW25L, designed for 2 core and 3 core (16–25mm²) and 4 core and 5 core (16mm²) SWA cable.

Indoor or outdoor?

BW type glands are for indoor, dry installations where environmental sealing isn't required. For wet or outdoor terminations, ask our team about a sealed gland.

Shop the range

SWA Cable & Glands

SWA Power Cable Specifications

Specifications for the SWA power cable supplied by Telenco UK.

ConductorClass 2 stranded copper
InsulationXLPE (cross-linked polyethylene)
Bedding & sheathPVC bedding, UV resistant PVC outer sheath
Voltage rating0.6/1kV
Operating temperature-25°C to +90°C (fixed installation)
StandardsBS 5467, IEC/EN 60502-1, IEC/EN 60228, flame retardant to IEC/EN 60332-1-2, BASEC approved
FAQs

SWA Cable FAQs

What does SWA stand for?

SWA stands for steel wire armoured. The steel wire layer protects the cable from mechanical damage, which is why SWA is used underground and outdoors.

Can SWA cable be buried directly in the ground?

Yes. Our SWA power cable is suitable for direct burial and underground installations, as well as outdoor use, indoor installations and cable ducting. Installation depth and route protection should follow BS 7671 and your installation design.

What is the difference between 2 core and 3 core SWA cable?

2 core SWA has two insulated conductors; 3 core SWA has three, giving a separate conductor that can be used as the earth. The right choice depends on your circuit design.

What size SWA cable do I need?

It depends on the load current, run length (voltage drop), installation method and protective device. Sizing should be calculated by a qualified electrician to BS 7671. We stock 6mm² SWA in 2 core and 3 core.

Is SWA cable UV resistant?

Yes, the SWA power cable we supply has a UV resistant PVC outer sheath for outdoor installations.

Can I buy SWA cable by the metre?

Yes. Our SWA power cable is sold per metre, so you can order the exact length required.

What gland do I need for SWA cable?

Use an SWA gland that matches both the entry thread size and the cable size. Our BW20L (20mm) and BW25L (25mm) brass SWA glands are for indoor, dry installations. Browse all cable glands.

How do I cut SWA cable?

Use heavy duty cable cutters sized for the cable diameter. See our range of cable cutters.

Talk to Our Team

Need SWA Cable for Your Project?

Tell us the cores, size and length you need and we'll help you get the right cable and glands.