Stainless Steel Pole Banding
Stainless Steel Pole BandingStainless steel banding, also called pole banding or steel strapping, fixes brackets, cable clamps and equipment to telegraph poles and other supports where drilling is not allowed. The band is wrapped around the pole, tensioned with a banding tool and locked with a banding clip. Telenco UK supplies the band, clips, tools and accessories used on UK telecom and utility poles. Pole banding products
How to fit pole banding
Ratchet or screw banding tool?Both tools tension and cut pole band. The BTL ratchet banding tool uses a ratchet for smooth, gradual tightening and has a built-in cutter. The BTS screw banding tool is a screw type bander for precise tensioning. If you need a full kit, the steel banding tool pack includes the BTS with snips, hammer, gloves and a case. Pole banding FAQsWhat is pole banding used for? Pole banding fixes brackets, cable clamps and equipment to telegraph poles and other supports without drilling. What size is Telenco pole banding? The band is 20mm wide and 0.7mm thick, supplied on 50m reels in a case dispenser. Which tool do I need for stainless steel banding? Use the BTL ratchet banding tool or the BTS screw banding tool to tension the band, and steel band cutting shears to cut it. How do I stop the band damaging cables? Fit the 20mm protective sleeve over cable down leads where they pass under the band. Fix equipment to the pole with pole brackets, and protect cables with cable capping. See all telegraph pole banding and capping. |


















