Technical Insights | Data Centre Racks

Server Rack Accessories Guide Shelves, PDUs, Cable Management & Airflow

Shop rack accessories →Rack shelvesRack PDUs

A server rack is only as good as what goes in it. The right accessories keep equipment supported, cables traceable, power tidy and air flowing in the right direction. This guide explains each type of server rack accessory, what it does and when you need it.

Shop server rack accessories

Order online for UK delivery from Telenco UK

Shop all rack accessories →Shelves & drawersRack PDUsAisle containmentServer racks

What are server rack accessories?

Server rack accessories are the components fitted to or inside a 19-inch rack beyond the frame itself: shelves and drawers, cable guides and brush panels, PDU mounting kits, airflow separation, fans and lights, side panels, castors, junction kits, grounding kits and cage nuts. Together they turn an empty rack into a serviceable, safe installation.

Support Shelves and drawers
Route Cable guides and brush panels
Power PDUs and mounting kits
Protect Airflow, earthing and security
01 / Shelves

Server Rack Shelves and Drawers

Shelves hold anything that is not rack-mountable: tower servers, small switches, routers, monitors and test equipment. Choose by mounting style, depth and load.

Shelf type How it fixes Best for Examples
Cantilever shelf Front rails only Light devices in shallow racks and wall cabinets 1U cantilever shelf, 200 mm
Fixed shelf (front mount) Front rails, 1U or 2U Network and comms cabinets UPTEC 1U 550 mm, 60 kg, 2U 400 mm, 25 kg
Adjustable ventilated shelf 4-point, adjusts to rail spacing Heavier equipment in deep server racks UPTEC 750 mm, adjusts 550–890 mm, 60 kg
4-point fixed shelf Front and rear rails Strong, simple support for mid-weight devices UPTEC 420 mm, 600 mm bay
Sliding shelf 4-point on runners Keyboards, monitors and devices you need to reach UPTEC 650 mm, 1000 mm bay
Storage drawer Sliding drawer Patch leads, tools and spares inside the rack UPTEC 650 mm drawer

Match the shelf depth to your rack depth and rail positions, and never exceed the rated load. Shop all rack shelves.

02 / Cable management

Server Rack Cable Management

Horizontal cable guides

1U or 2U ring panels between switches and patch panels keep patch cords at the right length and bend radius. Choose 65 mm rings for lower counts and 90 mm rings for denser patching, in metal or plastic. 5-ring 90 mm 1U guide.

Covered cable guides

Guides with a cover hide and protect cables for a neat front face. 1U covered guide.

Brush panels and grommets

Pass cables front to rear while blocking air bypass. 1U brush panel, 4U brush grommet guide and brush roof entry.

Overhead pathways

Above the rack, route fibre in an enclosed raceway and copper and power on tray. See our data centre cable management guide.

03 / Power

Rack PDUs and PDU Mounting Kits

Rack PDUs distribute power to every device. 0U vertical PDUs mount in the side space of 800 mm wide racks and save rack units; 1U horizontal PDUs suit narrower racks and cabinets. PDU mounting kits fix one or two vertical PDUs to the frame or cable ladder without using rack space.

04 / Airflow and environment

Airflow, Fans and Lighting

Airflow separation frames seal the gap between the 19-inch rails and the cabinet sides so hot exhaust air cannot recirculate to the equipment intakes. They are available for 600, 800 and 1000 mm wide server racks and for 2, 3 and 4 compartment colocation racks: 42U airflow separation frame, 800 mm.

A thermostat-controlled rack fan helps exhaust heat from enclosed racks, and a 1U LED rack light makes maintenance easier. At row level, use aisle containment and read our hot vs cold aisle guide.

05 / Structure and safety

Side Panels, Castors, Junction Kits and Earthing

Accessory What it does Example
Side panels Close the end of a row; lockable compartments add security 42U side panel, 1200 mm, 47U
Junction kit Bays adjacent racks together into a rigid row Front & rear junction kit, pack of 8
Castors Move racks into position Metal castors, 1500 kg dynamic load
Grounding kit Bonds the rack frame, doors and panels to earth 16 mm² braid, 1.5 m
Cage nuts and screws Fix equipment to square-hole rails M6 × 20 mm, pack of 50
06 / Checklist

Server Rack Accessories Checklist

1

Shelves

For every non-rackmount device, matched to depth and load.

2

Cable guides

One horizontal guide per switch or patch panel pair.

3

PDUs

A and B feeds with mounting kits.

4

Airflow

Blanking panels, separation frames and brush panels.

5

Earthing

A grounding kit on every rack.

6

Row hardware

Junction kits, end side panels and castors.

Still choosing the rack itself? Start with our guide on how to choose a server rack.

Frequently Asked Questions

Server Rack Accessories FAQs

What accessories does a server rack need?

Most server racks need shelves for non-rackmount equipment, horizontal and vertical cable management, rack PDUs with mounting kits, blanking or airflow separation to control airflow, and a grounding kit. Depending on the site you may also add side panels, castors, junction kits, a rack fan and an LED rack light.

What is the difference between a fixed and a sliding rack shelf?

A fixed shelf stays in place and is the strongest, simplest option. A sliding shelf runs out on rails so you can reach a keyboard, monitor or small device without removing it. Both are available as 4-point shelves that fix to the front and rear rails for heavier loads.

What is a cantilever shelf?

A cantilever shelf fixes to the front rails only, so it suits light equipment in shallower racks and wall cabinets. For heavier loads use a 4-point fixed or adjustable shelf supported front and rear.

What does a brush grommet panel do?

A brush panel or brush cable guide lets cables pass between the front and rear of the rack, or through the roof, while the bristles close around them to block air bypass and keep dust out.

Do server racks need to be earthed?

Yes. Metal racks should be bonded to the site earthing system so that doors, side panels and frames are at the same potential. A grounding kit with a braided earth strap, such as our 16 mm² 1.5 m kit, provides that bond.

Fitting out a rack or a row?

Telenco UK supplies server racks, shelves, cable management, rack PDUs, containment and cooling for UK data centres and comms rooms.