Fibre Pigtails
Fibre Optic Pigtails for Fusion SplicingA fibre pigtail is a short fibre with a factory-fitted connector on one end. The bare end is fusion spliced to the incoming cable inside a fibre patch panel, ODF or splice closure, giving a low-loss, factory-quality connector without field termination. We supply SC and LC pigtails in G.657A2 single mode and OM1, OM3 and OM4 multimode. Shop fibre pigtails
Choosing a pigtail
Connect the front of the panel with fibre patch leads; read our fibre connector types guide; browse all fibre optic cables. What is a fibre pigtail?A fibre pigtail (fibre optic pigtail) is a short length of fibre with a connector on one end only. The bare end is fusion spliced to a fibre in the incoming cable, inside a splice tray, fibre patch panel, ODF or closure; the connector plugs into the panel adapter. This gives a factory-polished, low-loss connector without terminating in the field. Fibre pigtail vs patch cord
Choosing fibre pigtailsMatch the connector and polish to your panel adapters (for example SC/APC or LC/APC), the fibre type to the cable being spliced (single mode G.657A2, or OM3/OM4 multimode), and choose 900 µm tight-buffered pigtails for easy routing in splice trays. Colour-coded sets of 12 make it quick to fill a 12-fibre tray in the correct fibre order. Strip, clean and cleave carefully, then protect each joint with a splice protector. See our fusion splicers and cleavers. |


















