Server Rack Cooling & Thermal Management | RACKEON
Thermal ManagementServer Rack Cooling & Enclosure Thermal Management
Heat is the biggest threat to equipment life inside any cabinet. Effective thermal management keeps electronics within their operating range, cuts failures and reduces maintenance visits.
RACKEON server rack cooling covers every stage of the heat load – from a thermostat-controlled fan to in-row and 100kW rear door units – giving Telenco UK customers complete server cabinet cooling solutions.

Choosing a Server Cabinet Cooling System
The right server cabinet cooling system depends on heat load, environment and how clean the air is. Low loads can be handled by convection or a cabinet cooling fan; higher loads need forced air cooling, a cabinet heat exchanger or an enclosure air conditioner.
Inside the data centre, cooling units such as the RACKEON rear door cooling unit and in-row cooling unit remove heat at the rack, while aisle containment stops hot and cold air mixing.
RACKEON cold aisle containment and hot aisle containment complete the system, so the cooling you install is delivered to the equipment intake instead of being lost to the room.

Server Cabinet Cooling Solutions Compared
Match the cooling method to the heat load and site conditions.
Cabinet Cooling Fan
A cabinet cooling fan with thermostat or rack fan tray is the simplest network cabinet cooling upgrade.
Forced Air Cooling
Filtered fans move outside air through the enclosure – efficient where ambient air is cool and clean.
Cabinet Heat Exchanger
Air-to-air heat exchangers cool a sealed enclosure, keeping dust and moisture out.
Enclosure Air Conditioner
An electrical enclosure air conditioner cools below ambient for high loads or hot sites.
In-Row & Rear Door
Data cabinet cooling at rack level, including liquid cooled server cabinet options.
Airflow Management
Airflow separation frames, ventilated shelves and cold aisle containment.
Cooling Capacity at a Glance
From a single fan to high-density cooling, choose the capacity your equipment needs.
Server Rack Cooling Products
Shop cooling units, fans and containment from Telenco UK.
RACKEON Rear Door Cooling 100kW
RACKEON In-Row Cooling 40kW
Thermostat Server Rack Fan
Cold Aisle ContainmentServer Rack Cooling – Frequently Asked Questions
Cabinet heat exchanger vs forced air cooling – dust prevention: which is better?
A cabinet heat exchanger keeps the enclosure sealed, so dust and moisture stay out – better for dirty or wet sites. Forced air cooling is more efficient but brings outside air in, so it relies on good filtration.
When do I need an enclosure air conditioner?
When the internal temperature must be kept below the outside ambient – for high heat loads, hot climates or direct sun. An air conditioner or rack mount air conditioning unit can cool below ambient; fans and heat exchangers cannot.
What are air conditioned server racks?
Air conditioned server racks have cooling built into or attached to the rack, such as in-row or rear door units, rather than relying only on room cooling.
How do I size server rack cooling?
Start with the total heat load in watts of the equipment in the rack, then allow for solar gain and ambient temperature. Our team can help size the right cooling.
Sectors We Serve
Need Help With Thermal Management?
Tell us the heat load and site conditions and we’ll recommend the right cooling solution.
Setting image: Unsplash, free to use under the Unsplash License.


















