Refine search 
Keywords
Length (m)
Blown Cables

Blown Fibre Cables

All products in this category are out of stock
Show out of stock products
 

Air Blown Fibre Cable for Microducts

Blown fibre cable (air blown fibre micro cable) is installed by blowing it into a microduct with compressed air. Because the microduct network goes in first, fibre capacity can be added later without new digging. Our blown cables use G.657A1 single mode fibre in tubes of 12, with a lightweight, water-blocked design and a durable HDPE anti-rodent sheath, and are sold per metre.

200 µm or 250 µm fibre?

Option What it means Fibre counts
250 µm fibre Standard coated fibre diameter, compatible with all splicing equipment 12, 24, 48, 72, 96, 144, 288
200 µm fibre Reduced coating diameter for a smaller cable and more fibres per microduct 12, 24, 48, 96, 144, 288

Choose 200 µm fibre when duct space is tight and you want the smallest cable for a given fibre count. Check that your splicing equipment and splice trays are set up for 200 µm fibre.

Installing blown fibre

  • Match the cable diameter to the microduct inner diameter for the best blowing distance.
  • Use a dedicated fibre cable blowing machine and clean, dry compressed air.
  • Lubricate the microduct where long blowing distances are needed.
  • Test the route and the installed fibre with fibre test equipment.

Related fibre cables

For standard ducts use fibre duct cable; for overhead routes use ULW aerial cable. Browse all fibre optic cables.