Function
- Reduces abrasion of aerial cables when in contact
- with branches of trees (tree-guards)
- with poles
- with pole hardware fittings
- with anchor clamp bail wire
- Can be used as strengthening member and protection for ADSS cables when installed in J Hook Suspension clamp.
- Increases the lifespan of coaxial cables on poles in windy zones.
- Can be used in maintenance as well as for network building.
Description
UV resistant black PVC sections – 16 mm wide and 2 mm thick in a variety of diameters. – spiral formed in the factory.
Compliant with the Restriction of Hazardous Substances Directive (RoHS - lead free) as adopted by the European Union.
Installation instructions
- Choose a spiral abrasion protector with an inside diameter directly smaller to the cable diameter (for a figure-8 cable, consider the total height).
- Cut the required length using adapted cutting pliers.
- Place the centre of the spiral cut length on the section of cable to be protected or reinforced.
- Wrap one side of the spiral protector around the cable starting from the centre.
- Repeat this last action with the other arm of the spiral protector.
| Code |
Description |
Int dia |
Band thickness |
Band Width |
Package |
| E2410-6 |
Spiral cable Protector 6mm |
6 mm |
1 mm |
8 mm |
20 pcs |
| E2410-16 |
Spiral cable Protector 16mm |
16 mm |
2 mm |
16 mm |
10 pcs |
| E2410-25 |
Spiral cable Protector 25mm |
25 mm |
2 mm |
16 mm |
10 pcs |
| E2410-33 |
Spiral cable Protector 33mm |
33 mm |
2 mm |
16 mm |
10 pcs |
| E2410-40 |
Spiral cable Protector 40mm |
40 mm |
2 mm |
16 mm |
10 pcs |
