The VIEW600 OTDR is used in the installation and maintenance of fibre optic cables.
The VIEW600 offers accurate and fast test results and creates a report automatically. The VIEW600 is equipped with an industrial-grade CPU for creating and storing test results.
This VIEW600 is module 4 including a wavelength of 1310/1550nm, 36/35dB, 0.7 event dead zone (m), 3 attenuation dead zone (m) and 35 PON dead zone (m).
| Model |
VIEW600 |
| Display |
7 inches, High Brightness TFT LCD, resolution 800 X 480 |
| Distance Unit |
m / km / mile / ft |
| Range setting (km) |
1. 3, 2. 5, 5, 10, 20, 40, 80, 120,160, 360km |
| Range settings (mile) |
0.81, 1.55, 3.11, 6.22, 12.4, 24.8, 49.6, 74.6, 99.4, 223.7mile |
| Pulse width |
3ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 10μs, 20μs |
| Distance accuracy |
±(1m+Distance×2.5×10-5 +Sampling resolution) |
| Llnearlty |
0.03dB |
| Sampling points |
256,000 points |
| Refractive Index |
1.000000 - 2.000000 (step: 0.000001) |
| Splitting ratio |
Up to 1:128 splitter |
| Resolution |
0.04m ~ 10.24m |
| Loss readout resolution |
0.0001dB |
| Battery Capacity |
Operating Time: Up to 12 hours |
| File Format |
SOR, BMP, JPG, GDM, SOLA, PDF |
| External connection |
USB 2.0 x 2 |
| Compatible connector |
APC(FC, SC, LC), UPC(FC, SC, LC, ST) |
| Power supply |
AC Input 100-240V, 50-60Hz / DC Input 19V, 3.42A |
| VFL port |
2.5mm ferrule type |
| VFL wavelength |
650nm ±10nm |
| VFL distance |
Up to 10km |
| VFL output power |
20mW |
| Light source |
Operating wavelength: 1310nm / 1550 nm ±10nm |
| Light source output power |
-5dBm |
| OPM port |
SC, FC, ST(interchangeable) |
| Wavelength calibration[OPM] |
850 / 1300 / 1310 / 1490 / 1550 / 1625 / 1650nm |
| Power range (OPM) |
-70 to +6dBm (Accuracy: 0.01dB) |
|
